PVC Connector Kits
Grid View | List View
Printed with 100% all-natural plant-based PLA, these kits are designed to connect together 1.25" PVC pipe (not included) for five different types of pyramids: the Great Pyramid, with an approximate slope angle of 51.8°, the Equilateral Pyramid (54.7° slope angle), the Nubian Pyramid (72°), the Russian Pyramid (76.3°), and what I call the Ra Pyramid (59.9°). 1.25" PVC pipe has an outside diameter of 1.66", which, if you are in a country that uses the metric system, that is equivalent to your pipe having an outside diameter of 42.16mm. If you can find pipe that has an outside diameter of 42mm, that should work well, but you have to make sure that is the outside measurement, because just like in the United States, what the size of your pipe is labeled as may be different from what its outside diameter actually is. If you only get the apex piece, you will need four of them, all of the same length. If you buy the full kit, you will need eight lengths of pipe--and with the exception of the Equilateral Pyramid--you will need to cut some of them according to the instructions I give below, and I strongly recommend using an inexpensive pipe cutter to do this.
Free shipping in the United States!
The 1.25" PVC Giza Connector Kit
With a slope angle of approximately 51.8°, this connector kit is in the same dimensions as the Great Pyramid in Giza and has always been a customer favorite.
The 1.25" PVC Giza Apex Connector
The 1.25" PVC Giza
Connector Kit
$45
$135
The 1.25" PVC Equilateral Connector Kit
The Equilateral Pyramid is a little steeper than the Great Pyramid with a slope angle of approximately 54.7°, whose sides form perfect equilateral triangles making it the most balanced pyramid of them all. The great thing about this pyramid is that whether you buy just the apex piece or the full kit, you do not need to cut any of the 2x2s, as long as they are all the same length.
The 1.25" PVC Equilateral Apex Connector
$45
The 1.25" PVC Equilateral Connector Kit
$135
The 1.25" PVC Nubian Connector Kit
Popularized by David Wilcock, this pyramid has a slope angle of 72°, and is similar in dimension as those pyramids commonly found in ancient Nubia (present-day Sudan), incorporating the pentagram and the sacred number, phi (1.618).
The 1.25" PVC Nubian
Apex Connector
$45
The 1.25" PVC Nubian
Connector Kit
$135
The 1.25" PVC Russian Connector Kit
With an approximate slope angle of 76.3°, this pyramid has the same dimensions as those massive pyramids built by Alexander Golad in Russia, also incorporating the sacred number phi into its geometry. This dimension has become one of the more popular choices in recent years.
The 1.25" PVC Russian
Apex Connector
$45
The 1.25" PVC Russian
Connector Kit
$135
The 1.25" PVC Ra Connector Kit
The Ra collective has stated that the ideal dimensions for a pyramid would be where the height equals 1, and the perimeter equals 1.16. This translates to an extremely steep pyramid, almost like a steeple. Ra has admitted on occasion that they have occasionally made mathematical statements in error due to translation issues. While they did not say this was the case for this specific statement, I have to wonder whether they meant to say that the ideal dimensions of a pyramid would be where the height equals 1, and each side equals 1.16. This translates to a pyramid with a 59.88° slope angle which creates a cross section that is almost a perfect equilateral triangle. They have also recommended that pyramids should have an apex angle of less than 70°. With an apex angle of 60.24°, it is well below that threshold.
The 1.25" PVC Ra
Apex Connector
$45
The 1.25" PVC Ra
Connector Kit
$135
~~~~~~~~~~~~~~~~
Proudly handmade in the U.S.A.
These connector pieces are made from 100% all-natural, plant-based PLA. While they can handle being outside in the weather just fine, they could potentially warp in extremely hot weather if left out in the direct sun for prolonged periods of time. Partial shade should be fine.
While these connector pieces are usually in the color that is pictured, they could be in a different color, depending upon the availability of the PLA. I strive to ship out my products within three days at the most, but I cannot guarantee how long it will take USPS to deliver it to you. Usually, it will arrive within about a week from when you order it, but sometimes it can take up to three weeks for USPS to deliver it if there is some sort of delay on their end.
Please be sure to recycle any packaging. If it came in plastic wrapping, bubble wrap, including a plastic bubble wrap envelope, they can all be recycled with your plastic bags at local grocery stores like Walmart and Safeway.
Customers purchasing from outside the United States are responsible for all taxes and duties, including, but not limited to: all customs fees, VAT, and any other tariffs involved to bring this into your country.
Customers from other countries are responsible for making sure they have the right-sized PVC pipe to work with these connector pieces. If you purchase these and are not able to find the right size, I do accept returns, as long as it is returned in good condition, minus shipping costs.